Electromagnetic Field Analysis and Performance Improvement of Superconductive-Assisted Polishing Machine Model by Using Superconducting Tape Ribs
Abstract
In this study, we have focused on superconductive-assisted polishing machine that is mainly composed of superconducting bulks and permanent magnet. This machine utilizes magnetic levitation, which enables processing in mid-air and inside a hollow object. In our previous work, we used the superconducting tapes instead of superconducting bulks for improvement, and confirmed that the performance was well as using superconducting bulks. Therefore, we considered that it is necessary to evaluate the performance of the superconductive-assisted polishing machine using superconducting tapes. We compared the previous model and the model with ribs which had a better result in the experiment. It is expected that the ribs will trap the magnetic flux so that we can get greater repulsive force. However, ribs did not work well enough in the calculations result using finite element method, because the magnetic flux did not penetrate vertically into the ribs.
References
2. Komori M. et al. A New Type of Superconducting Bearing System Using High Tc Superconductors and the Dynamics. – Applied Superconductivity, 1994, 2(7-8), pp. 499–509.
3. Deng Z. et al. High-Efficiency and Low-Cost Permanent Magnet Guideway Consideration for High-Tc Superconducting Maglev Vehicle Practical Application. – Superconductor Science and Technology, 2008, 21(11), DOI:10.1088/0953-2048/21/11/115018.
4. Komori M. et al. Dynamic Characteristics in the Horizontal Direction for New Type SMB Using SC Bulk and SC Coil. – IEEE Transactions on Applied Superconductivity, 2020, 30(4), DOI:10.1109/TASC.2020.2971893.
5. Nakashima H. et al. Study on Polishing Method using Magnetic Levitation Tool in Superconductive-Assisted Machining. – International Journal of Automation Technology, 2021, 15(2), pp. 234–242, DOI:10.20965/ijat.2021.p0234.
6. Hiramatsu Y. et al. Evaluation of Magnetic Cutting and Polishing with Superconducting Bulks. – Journal of Physics: Conference Series, 2017, 871(1), 012048, DOI:10.1088/1742-6596/871/1/012048.
7. Kinoshita Y. et al. Evaluation of Superconductor Assisted Machining (SUAM) with Superconducting Coated Conductors Using the Finite Element Method. – Journal of Physics: Conference Series, 2020, 1590(1), 012023, DOI:10.1088/1742-6596/1590/1/012023.
8. Inoue M. et al. Enhancement of in-Field Jc in Gd1Ba2Cu3O7-δ Coated Conductor by Using Highly Oriented IBAD Substrate. – Physics Procedia, 2015, 67, pp. 903–907, DOI:10.1016/j.phpro.2015.06.152.
#
1. Murakami M. et al. A New Process with the Promise of high Jc in oxide superconductors. – Japanese Journal of Applied Physics, 1989, 28(7R), 1189.
2. Komori M. et al. A New Type of Superconducting Bearing System Using High Tc Superconductors and the Dynamics. – Applied Superconductivity, 1994, 2(7-8), pp. 499–509.
3. Deng Z. et al. High-Efficiency and Low-Cost Permanent Magnet Guideway Consideration for High-Tc Superconducting Maglev Vehicle Practical Application. – Superconductor Science and Technology, 2008, 21(11), DOI:10.1088/0953-2048/21/11/115018.
4. Komori M. et al. Dynamic Characteristics in the Horizontal Direction for New Type SMB Using SC Bulk and SC Coil. – IEEE Transactions on Applied Superconductivity, 2020, 30(4), DOI:10.1109/TASC.2020.2971893.
5. Nakashima H. et al. Study on Polishing Method using Magnetic Levitation Tool in Superconductive-Assisted Machining. – International Journal of Automation Technology, 2021, 15(2), pp. 234–242, DOI:10.20965/ijat.2021.p0234.
6. Hiramatsu Y. et al. Evaluation of Magnetic Cutting and Polishing with Superconducting Bulks. – Journal of Physics: Conference Series, 2017, 871(1), 012048, DOI:10.1088/1742-6596/871/1/012048.
7. Kinoshita Y. et al. Evaluation of Superconductor Assisted Machining (SUAM) with Superconducting Coated Conductors Using the Finite Element Method. – Journal of Physics: Conference Series, 2020, 1590(1), 012023, DOI:10.1088/1742-6596/1590/1/012023.
8. Inoue M. et al. Enhancement of in-Field Jc in Gd1Ba2Cu3O7-δ Coated Conductor by Using Highly Oriented IBAD Substrate. – Physics Procedia, 2015, 67, pp. 903–907, DOI:10.1016/j.phpro.2015.06.152
